Not sure which crane you need? Enter what you’re lifting, how far it has to go, and how high — we’ll check it against the load chart for every crane in our fleet and show you which ones can make the pick.

Crane

What does it weigh?

How far out from the crane (radius)?

From the center of the crane to where the load sets down. When in doubt, round up.

How high does it go? (optional)

Height where the load lands, like a roof or top floor.

Slings & rigging (optional)

Room to set up Plenty of room outriggers all the way out Tight site outriggers part way out

GMK4115 counterweight Add plates if the lift needs it Starts at our standard 9,000 lb, up to 57,500 lb Standard only 9,000 lb, nothing added Set the plates myself Add or remove counterweight sections

Enter the weight and distance

We’ll check each crane’s load chart and tell you whether they can make the lift.

This is a planning estimate from the manufacturer’s load charts, not a lift plan. It assumes level, firm ground and counts the hook block in the weight. Every lift is checked by our operator against the actual crane, setup, and site before we pick.

Lift Calculator

Have a lift coming up?